Repareer je spullen Gemeenschap Winkel

Model A1418 / Late 2013 / 2.7 & 2.9 GHz Core i5 or 3.1 GHz Core i7 Processor

254 Vragen Bekijk alle

Opties

Display "Dot" but is not a dead pixel

Well,. i recently changed my hhd for an ssd, and i am pretty sure that the display assembly was never touched because i was there during the whole process… but right now there is a stain in my display… Any suggestions?

Block Image

Block Image

Block Image

Beantwoord deze vraag Dit probleem heb ik ook

Is dit een goede vraag?

Ja Nee
Score 0
Voeg een opmerking toe

1 Antwoord

Filteren op:
Meest nuttige Nieuwste Oudste
Het nuttigste antwoord

Opties

This looks like one of three things :

  1. Assuming that the display is lit with LED’s, it looks like one or a couple LED’s burned out.
  2. It could be a locked or stuck pixel , to which I would use UDPixel to run the undead pixel dot at a space of 5x5 and move the flashing dot where the spot is for a few minutes.
  3. Finally, it could be a dead pixel with no real solution, and you can either accept it, or look into replacing the monitor.

All of this is given without any guarantee of fixing the issue, and is my personal opinion.

Was dit antwoord nuttig?

Ja Nee
Score 1
Voeg een opmerking toe

Voeg je antwoord toe

MasterG zal eeuwig dankbaar zijn.
Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 1

Afgelopen 30 dagen: 1

Altijd: 27