Repareer je spullen Gemeenschap Winkel

Released September 21, 2018. Models: A1921, A2101, A2102, and A2104 / Available as GSM or CDMA / eSIM or nano-SIM / 64, 256, or 512 GB / Silver, Gold, or Space Gray (Pronounced "iPhone 10 S Max.")

375 Vragen Bekijk alle

Opties

iPhone XS Max Speaker Repair

Hi, I’ve got an XS max with a non working ear speaker. 

I resoldered a known working speaker on to the ear speaker/proximity sensor flex cable but still can’t get it working so it looks like a problem with the cable itself. 

there looks to be a small chip on the cable. Is this responsible for the ear speaker working? And is it possible to replace it with a working one. I’ve attached a picture to show the part I’m talking about.

thanks in advance

edit: I should add that the cable itself does not appear damaged or ripped in any way. Also the previous owner said that they had the screen replaced by a third party.

Block Image

Beantwoord! Bekijk het antwoord Dit probleem heb ik ook

Is dit een goede vraag?

Ja Nee
Score 0
1 Opmerking

Please guys any advice would be really appreciated

door

Voeg een opmerking toe

2 Antwoorden

Filteren op:
Meest nuttige Nieuwste Oudste
Gekozen oplossing

Opties

I managed to fix this. De soldered the speaker and scraped off some of the plastic covering to expose the copper. Soldered the speaker back on and it’s working. So I guess the connection being made between the speaker and the flex wasn’t strong enough before.

Was dit antwoord nuttig?

Ja Nee
Score 0
Voeg een opmerking toe
Het nuttigste antwoord

Opties

This looks like the flood illuminator. It shouldn’t affect the speaker. More than likely you have damaged the assembly when soldering the new speaker.

I would try another flex assembly to rule that out. If the new flex assembly provides sound you will need to transfer the original flood illuminator over to retain face ID.

Was dit antwoord nuttig?

Ja Nee
Score 1

1 Opmerking:

The flex was already ruled as not working before I soldered the new speaker on to the cable as I actually soldered the original speaker to a working flex and it worked.

door

Voeg een opmerking toe

Voeg je antwoord toe

Callum zal eeuwig dankbaar zijn.
Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 1

Afgelopen 30 dagen: 2

Altijd: 152