Plastic bits in wash after clutch replacement
Hi there! My 8 year old direct drive washing machine was making a screeching sound spinning in one direction. I ordered a new clutch assembly and successfully replaced it. Upon reassembly the tub ring is slightly interfering with the balance ring and will carve a groove out of the balance ring if I don’t do something. I tightened everything properly (I thought).
The problem is identical to the problem referenced HERE
And shown in images/videos HERE
One thought I had is to simply shave down the tub ring slightly to prevent interference, but it would be great to know why this misalignment might happen. Thank you!
Is dit een goede vraag?