Ga door naar hoofdinhoud

Google's third-generation Pixel-branded smartphone, and their first "notched" phone. Comes with a 6.3" QHD+ OLED display and 64 or 128 GB of storage. Available in Nearly White, Just Black, or Not Pink.

77 Vragen Bekijk alle

Replacement back panel coming off

I replaced my back panel several weeks back with a kit purchased from ifixit. Followed all directions from the walk through and general steps from multiple other sites .

Within 24 hours the sides and edges are starting to come up and within a week the whole back panel wants to come off completely.

Each time I removed the adhesive and used the leftover from the supplied adhesive provided in the kit to re-apply.

Each time, same thing. I tried this 3 sperate times…

I even tried heating the phone and adhesive up before and during applying it. I also used clamps and left them for 12+ hours to insure a seal.

I feel the adhesive is bad but want your thoughts before I reach out to support.

Beantwoord deze vraag Dit probleem heb ik ook

Is dit een goede vraag?

Score 0
Voeg een opmerking toe

1 Antwoord

You must use little of b8000 in the corners

just a little to see if there is a difference

the problem is if you use too much of the glue may be difficult to open the phone other time

but just a little because the glue is very powerful

Was dit antwoord nuttig?

Score 0
Voeg een opmerking toe

Voeg je antwoord toe

Ryan Booth zal eeuwig dankbaar zijn.
Weergavestatistieken:

Afgelopen 24 uren: 1

Afgelopen 7 dagen: 1

Afgelopen 30 dagen: 5

Altijd: 270