Ga door naar hoofdinhoud

2.5 GHz dual-core Intel Core i5 processor (Turbo Boost up to 3.1 GHz) with 3 MB shared L3 cache.

265 Vragen Bekijk alle

No WiFi or Bluetooth after replacing battery and speakers

I’m not sure where to begin looking for the problem. Can someone point me in the right direction? I have no Wi-Fi or Bluetooth after replacing the battery and speakers on my MacBook Pro 13 inch retina late 2012 laptop. I followed the tutorial exactly and did not seem to have any problems during the repair.

Beantwoord deze vraag Dit probleem heb ik ook

Is dit een goede vraag?

Score 0
Voeg een opmerking toe

2 Antwoorden

Het nuttigste antwoord

Either the I/O board cable or the I/O board its self has an issue

MacBook Pro 13" Retina (Late 2012-Early 2013) I/O Board Data Cable

MacBook Pro 13" Retina (Late 2012-Early 2013) Right I/O Board

Here’s the guide MacBook Pro 13" Retina Display Late 2012 I/O Board Replacement

MacBook Pro 13" Retina (Late 2012-Early 2013) Right I/O Board Afbeelding

Product

MacBook Pro 13" Retina (Late 2012-Early 2013) Right I/O Board

$49.99

MacBook Pro 13" Retina (Late 2012-Early 2013) I/O Board Data Cable Afbeelding

Product

MacBook Pro 13" Retina (Late 2012-Early 2013) I/O Board Data Cable

$4.99

Was dit antwoord nuttig?

Score 1

3 opmerkingen:

I’m an amateur here so I really appreciate your time. I made sure all cables were reconnected properly. In your opinion should I proceed with replacement of the recommended items? I was extremely careful when I replaced the battery so I don’t think I damaged anything. Are there any other things I should check first? The only other ‘symptom’ before I replaced the battery was occasional difficulty getting the laptop to connect to a Bluetooth speaker. It would sometimes take multiple attempts to connect with no apparent cause. Thanks again.

door

Try reseating the I/O cable, if that fails replace it and test again.

door

Will do thanks!

door

Voeg een opmerking toe

I’m having this same issue. Did you solve it in the end?

Was dit antwoord nuttig?

Score 0

1 Opmerking:

@henrychugh26 - Did you try resetting the cable and if that didn’t help replace the cable. 40% of the time reseating fixes it and the other 40% replacing is needed. And lastly 20% the board is corroded up.

door

Voeg een opmerking toe

Voeg je antwoord toe

Angela Desjardins zal eeuwig dankbaar zijn.
Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 2

Afgelopen 30 dagen: 10

Altijd: 514