Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Winkel

Wi-Fi only variant of the fifth generation of iPad, released in March 2017. Available with 32 and 128 GB storage options featuring a 9.7" Retina display and 64-bit A9 processor.

77 Vragen Bekijk alle

Why is my iPad screen not working after replacing screen and battery?

After I replaced my iPad 5’s screen, battery, and home button assembly, the screen won’t turn on until it is plugged in. Once the screen is on, it is covered in vertical and horizontal colored lines and there is a vertical black strip roughly an inch wide going down the middle of the screen. I’ve already taken the glass screen and the lcd screen off and checked all the connections multiple timed and all of them seem fine. All of the cables are also intact as far as I can tell. I don’t think it’s a problem with the lcd either because the colored lines are fairly uniform and there aren’t any black blotches like I’ve seen in a lot of damaged lcd pictures. Is there anything else I can do?

Beantwoord deze vraag Dit probleem heb ik ook

Is dit een goede vraag?

Score 0
Voeg een opmerking toe

1 Antwoord

It sounds like a bad connection. Get a magnifying glass and check all of the connections for damaged or bent pins. If they are fine try cleaning the connections with a qtip and alcohol and a soft brush. Make sure to disconnect the battery before you disconnect the screen.

Was dit antwoord nuttig?

Score 0
Voeg een opmerking toe

Voeg je antwoord toe

Lily R. zal eeuwig dankbaar zijn.
Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 0

Afgelopen 30 dagen: 2

Altijd: 19