Ga door naar hoofdinhoud

Model A1286. Released February 2011 / 2.0, 2.2, or 2.3 GHz Quad-core Intel Core i7 Processor

586 Vragen Bekijk alle

Hard drive compatibility MacBook Pro early 2011

I have the hard drive to my old Macbook pro 2011 and want to get a used macbook pro to put it in. Are there any new models (obviously still older model) that it can be placed in or do I have to stick with the 2011 editions?

Beantwoord! Bekijk het antwoord Dit probleem heb ik ook

Is dit een goede vraag?

Score 0
Voeg een opmerking toe

1 Antwoord

Gekozen oplossing

Your HDD is a standard 2.5” SATA II (3.0 Gb/s) or SATA III (6.0 Gb/s) depending on when it was built and if its still the original drive that came in the system.

The 2012 13” & 15” Unibody MacBook Pro’s are the last SATA based laptops Apple made. The retina MacBook Pro’s jumped to blade SSD’s and the newest Touch Bar systems even did away with the blade SSD drive and went to soldered on storage (not upgradable).

The iMac’s have also gone through a few iterations as well! The 2012 21.5” is the first iMac which uses a 2.5” SATA drive and the 27” still used the 3.5” SATA drive (both SATA III). You could still use the 2.5” drive in the 27” models but you need an adapter frame. Just this month Apple dropped the HDD option in the newer 27” models (Fusion Drive config).

So where does that leave us? You can’t really install the drive internally and as its SATA I/O is also slower than the faster blade SSD’s it really doesn't offer much benefit either.

But! Thats not to say the drive is useless! Getting a 2.5” SATA drive case is what I would do. Then you can transfer your data over to your new system which ever you get like this one 2.5” USB 3.0 SSD SATA Hard Drive Enclosure. As well as use it to extend your external storage for backup after reformatting.

Was dit antwoord nuttig?

Score 1

4 opmerkingen:

Ok so why cant I install it in a 2015 model if they use the same hardrive? Im only focused on the latest model that I can open and pop it in.

door

@aquick - The > Newest < MacBook Pro you're 2.5" SATA drive will fit is either of the 2012 13" or 15" Unibody systems. The 2012 Retina models onward use a blade PCIe SSD a very different interface.

The 2015 MacBook Pro has no means to support your drive internally. You still can use it, as I explained with the link to a 2.5" drive case which you can put it into.

door

That clears it up. I want to explor different options and I didnt know abt the encasing so thanks for that info as well!

door

@aquick - Don't forget to score the answer and accept it if you're set!

door

Voeg een opmerking toe

Voeg je antwoord toe

Ayesha zal eeuwig dankbaar zijn.
Weergavestatistieken:

Afgelopen 24 uren: 1

Afgelopen 7 dagen: 6

Afgelopen 30 dagen: 18

Altijd: 884