Repareer je spullen Gemeenschap Winkel

Model A1419 / EMC 3070 / Mid 2017 / 3.4, 3.5 or 3.8 GHz Core i5 or 4.2 GHz Core i7 Kaby Lake Processor (ID iMac18,3) / Retina 5K display. Refer to the older iMac Intel 27" Retina 5K Display (Late 2014 & 2015) guides as the system is very similar.

293 Vragen Bekijk alle

Opties

Fusion Drive unreadable after I take it off for place it on Enclosure.

I make SSD Fusion Drive for my iMac, then the iMac just dead with no reason.

I need the files in it, so I open the LCD and take the SSD from it to Enclosure, and I try to access the SSD on my Macbook.

The whole files just show up as it should be. I try to copy-paste couple files that I need, but can’t complete.

Looking for a solution on Google, but all of solution just tell me to format the Fusion Drive.

The Files is so important, just want to access/copy-paste it.

Is there any solutions to recover the data without format it ?

Help me, please.

Beantwoord deze vraag Dit probleem heb ik ook

Is dit een goede vraag?

Ja Nee
Score 0

1 Opmerking:

Did you replace the HDD with a SSD and then setup a Fusion Drive set using two SSD's? If this is the case we may not be able to fix this!

door

Voeg een opmerking toe

1 Antwoord

Filteren op:
Meest nuttige Nieuwste Oudste

Opties

Your Fusion drive is made up of two drives! The SATA HD and a PCIe SSD (cache drive). Removing the drives from your system won’t work here as it sounds like your system hadn’t finish writing the data over from the caching SSD to the HDD.

So… Lets try fixing your system instead of trying to save your data that way we fix both issues!

We need to understand what happened to the system. Can you explain fully what started the cascade of these events.

Was dit antwoord nuttig?

Ja Nee
Score 0
Voeg een opmerking toe

Voeg je antwoord toe

Lazuardi Deril zal eeuwig dankbaar zijn.
Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 0

Afgelopen 30 dagen: 0

Altijd: 47