Ga door naar hoofdinhoud

The Apple Watch Series 1 is a revamp of the original Apple Watch, announced September 7, 2016. Most of the parts are the same as the Series 2

120 Vragen Bekijk alle

isopropyl alcohol 90% replacement

Replacing my Apple Watch S1 screen. In the replacement instructions there are a couple places that says to use isopropyl alcohol 90% or better. Due to Covid-19 all the stores in my area don’t have any at this time. Is there a substitute I can use?

Thanks.

Beantwoord deze vraag Dit probleem heb ik ook

Is dit een goede vraag?

Score 0
1 Opmerking

IPA is mostly used to soften the adhesive. It doesn't help much

door

Voeg een opmerking toe

2 Antwoorden

Het nuttigste antwoord

The problem is you need something that will clean off the adhesive and not leave a film which messes up the fresh adhesive.

So your damed and double damed here ;-{

You can use ethanol but using it in a confined space can be dangerous both from the fumes and the risk of igniting the vapors! And you would need reagent quality which is also hard to find.

You’ll need to wait until you can find it or hunt it down - Sorry ;-{

Was dit antwoord nuttig?

Score 1

1 Opmerking:

Thanks Dan for the straight forward answer. I'll have to keep calling our store each day to see if they get any in. Yep, I scrxxed for now.

door

Voeg een opmerking toe

This might be a good time to mention that for electronics 99% isopropyl alcohol is safest and

for disinfectant 70% is most effective.

This web, though commercial, describes all the concentations and why best quite well.

https://blog.gotopac.com/2017/05/15/why-...

Was dit antwoord nuttig?

Score 1
Voeg een opmerking toe

Voeg je antwoord toe

Michael Goebel zal eeuwig dankbaar zijn.
Weergavestatistieken:

Afgelopen 24 uren: 1

Afgelopen 7 dagen: 4

Afgelopen 30 dagen: 9

Altijd: 138