Repareer je spullen Gemeenschap Winkel

Model A1225 / Mid 2007 and Early 2008 / 2.4, 2.8, or 3.06 GHz Core 2 Duo processor

433 Vragen Bekijk alle

Opties

How to manage wires and cables when taking iMac apart

I want to try and fix my overheating Mac. I’ve watched lots of tutorials and think I may need to go as far as replacing the thermal paste on my CPU and graphics card. One thing that doesn’t get mentioned is how to keep track of the wires/cables and how to make sure you remember which ones goes where. I’ve seen someone using post-it strips, does anyone else have any tips for methods they use when doing this? Cheers.

Beantwoord deze vraag Dit probleem heb ik ook

Is dit een goede vraag?

Ja Nee
Score 0
Voeg een opmerking toe

1 Antwoord

Filteren op:
Meest nuttige Nieuwste Oudste

Opties

First of all photograph all wire plugs and sockets. You could then with a fine tipped marker pen number each cable plug and socket.

Was dit antwoord nuttig?

Ja Nee
Score 0

1 Opmerking:

Thanks for your reply Thomas, much appreciated. Do you mean mark up a print out of the photos of the wires etc? I wonder though how I will still know which wire is which when putting them back if I have only marked up a photo? It may still be hard to recognise them if they are all similar. Cheers.

door

Voeg een opmerking toe

Voeg je antwoord toe

Ben Emms zal eeuwig dankbaar zijn.
Weergavestatistieken:

Afgelopen 24 uren: 1

Afgelopen 7 dagen: 3

Afgelopen 30 dagen: 6

Altijd: 33