Rep: 23
3
I don’t have the technical skills for starters. However I recently replaced the hardrive cable following the Ifixit detailed instructions and it worked. While i have it opened I noticed loads of dust on the logic board but not sure how to clean it without damaging it.. Thank you in advance
Is dit een goede vraag?
Rep: 480,5k
35
330
971
I use a small soft paint brush and a can of can’ed air. carefully brush the surfaces to loosen the stuck dust, use the can of can’ed air to push the debris away.
Was dit antwoord nuttig?
Thank you for your prompt response. One further question, does any can air can be used used? I read something about that some might provide static electricity. Thanks again
@gustgo Canned air can be used. Just don't use a vacuum because that will cause static electricity to become a problem.
Thanks a million
Can'ed Air won't, Vacuums do!
@danj thank you, greatly appreciate the advice
Afgelopen 24 uren: 0
Afgelopen 7 dagen: 0
Afgelopen 30 dagen: 2
Altijd: 59
