Rep: 13
1
So my friend gave me his iPhone XS and he attempted a repair and ripped the display and front-facing speaker cable. I want Face ID to work here. I heard that replacing the speaker assembly will make the Face ID not work. I am advanced in soldering. Can I take off a module and connect it to a replacement to get it working again? If so, what do I have to do?
Is dit een goede vraag?
Rep: 7,1k
4
2
2
You would have to repair the cable that is torn. The wires in the cable are smaller than a human hair and there are quite a few of them. It been done but you have to be really good at micrsoldering and have a lot of time and be patient. I have seen it done on YouTube but in my opinion I would just spend the 15 dollars on replace the setup and deal with no face Id. You will still have your password
Was dit antwoord nuttig?
Yes, but can I take off the Proximity sensor and Ambient light sensor and put those on another OEM flex cable?
No, it's matched. It has to be the original items. Sorry
Afgelopen 24 uren: 0
Afgelopen 7 dagen: 0
Afgelopen 30 dagen: 0
Altijd: 41
