Repareer je spullen Gemeenschap Winkel

Announced September 9th, 2014, this device is Apple's first foray into smart wearables. iFixit's repair manuals are applicable to Apple Watch (steel) and Apple Watch Sport (aluminum).

210 Vragen Bekijk alle

Opties

Should Apple Pay work after Watch Original screen replacement?

I find conflicting information about whether Apple Pay can be expected to work after screen replacement. I think this is because of confusion about the differences between Original/Series 1 and more recent models. My understanding is that the Original at least - and possibly Series 1 too - should be able to retain functional Apple Pay after a screen replacement. Is this correct?

The watch in question had been reset to factory settings before being worked on. After replacing the screen it was set up as a new watch and Apple Pay cards were added. However, Apple Pay does not function: only the GUI shows up. No connection is made with the terminal (I think it says “move closer”). All other functionality seems to work, including force touch. Is this expected? Are there any other steps?

Beantwoord deze vraag Dit probleem heb ik ook

Is dit een goede vraag?

Ja Nee
Score 0
Voeg een opmerking toe

1 Antwoord

Filteren op:
Meest nuttige Nieuwste Oudste
Het nuttigste antwoord

Opties

This gets into the game of Where’s Waldo! The location of the NFC sensor and its NXP 67V04 NFC Controller.

The Original Series & Series 1 have both located within the display assembly so when you replace the assembly you lose the function. There is no means to re-enable it.

With the Series 2 & Series 3 the NFC module is removable so you can swap it over into the new display Install Series 2 Display on a Series 3 with Apple Pay

Even the Series 4 & 5 have the ability to swap out the NFC unit as well.

Was dit antwoord nuttig?

Ja Nee
Score 2

9 opmerkingen:

Are you sure? This is the opposite of what I've seen elsewhere - the Series 0 has it on the main board. e.g. https://d3nevzfk7ii3be.cloudfront.net/ig... In fact, it was a comment of yours that pointed me at this information. Why is my NFC (apple pay) not working?

door

The Original series and Series 1 has the controller within the SIP, but the sensor is still within the display. I should have been clearer, sorry. > I'm only human < ;-{

door

But then it should work, shouldn't it? I'd expect the controller to be the part that does secure functions, and the sensor to be interchangeable...

door

I've seen mixed results here. I'm not sure if the replacement parts being sold are good or bad.

door

Which replacement parts do you mean? My suggestion is that a Series 0 screen-only replacement should not touch the antenna or the NFC chip, so should in principle just work.

door

4 commentaren meer tonen

Voeg een opmerking toe

Voeg je antwoord toe

sambrightman zal eeuwig dankbaar zijn.
Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 3

Afgelopen 30 dagen: 17

Altijd: 556