Repareer je spullen Gemeenschap Winkel

Model A1054

114 Vragen Bekijk alle

Opties

another U28 chip issue or...

Ok so my g4 chimes when on button is pressed, blank screen, fan runs - nothing. I was able to get it to start a couple of times and it would run a short time before shutting down. First time it quit after moving it a few inches. second time my g4 quit it showed vertical grey/blue lines, then blank-ish screen. Seemed like it was on but showing a blank screen.

Hoping to not change out the motherboard again (did so earlier this winter) and am game to try soldering the U28. Good candidate?

Beantwoord! Bekijk het antwoord Dit probleem heb ik ook

Is dit een goede vraag?

Ja Nee
Score 0
Voeg een opmerking toe

1 Antwoord

Filteren op:
Meest nuttige Nieuwste Oudste
Gekozen oplossing

Opties

Buy the illuminated magnifying glass that iFixit sells, and also a Weller WM120 fine-point soldering iron, and some solder paste -- these three items will make the job MUCH easier.

And yes, I would say this is an ideal candidate, i.e. black screen and "fan on high". It certainly can't hurt it.

Was dit antwoord nuttig?

Ja Nee
Score 3
Voeg een opmerking toe

Voeg je antwoord toe

clay zal eeuwig dankbaar zijn.
Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 0

Afgelopen 30 dagen: 0

Altijd: 754