Rep: 1
2
My whirlpool impeller washer WTW5000DW1 gets to the spin cycle drains then it clicks, then the impeller will spin fast and stop a few times but the drum doesnt and the spin cycle never engages. Please help.
Is dit een goede vraag?
Rep: 1
2
Thank you all for the help and tips.
We removed the wash plate and checked the hub assembly. It was worn out smooth. So it ended up being the hub.
New issue, although it is spinning now, when washing it makes a ticking sound when the wash plate and basket turn. It's working for now though.
Was dit antwoord nuttig?
Rep: 449,1k
11
366
1,4k
Hi @staceysa ,
There may be a problem with the washer drive pulley, part #9 Gearcase, Motor and Pump parts
Was dit antwoord nuttig?
So we removed the gearcase and they all seem fine. There isnt any wear on the gears or broken teeth. The washer drains so I'm thinking it's not the pump, could it be the impeller itself? Or does that gearcase go bad with no visible signs? When it switches to the spin cycle the tub drains, then you hear the click for spin and the impeller will spin making a noise, then stop. It will do this 4 times then just sit and do nothing until the timer switches to rinse.
What happens if you try to manually drain and spin a load with the timer control knob set one or two steps past where it normally starts?
Does rinse and spin work OK, auto or when manually selected?
Have you checked the belt, pulley and carbon brushes?
Was dit antwoord nuttig?
Afgelopen 24 uren: 1
Afgelopen 7 dagen: 14
Afgelopen 30 dagen: 58
Altijd: 3,184
3 opmerkingen
The belt is intact
door Stacey Austin
Please give us your model number
door mayer
WTW5000DW1 sorry about that.
door Stacey Austin