Rep: 11
1
I have an intel 2.16 24" iMac and at the top of the screen there is an upside-down sun burst of dirt between the LCD and the protective plastic that covers it. Is it possible to separate the actual LCD from the plastic so I can clean the stripes? This is the older white plastic "Pizza Box" version.
Is dit een goede vraag?
Rep: 5,1k
34
36
6
On this iMac model there is no extra part between the LCD and protective film. This seems like something on the LCD. I would think you have to change the LCD. This is not very difficult and you can find a good used on on ebay.
I found some for you here:
http://shop.ebay.com/i.html?_from=R40&_t...
The Apple part no. is 661-4184 (see the parts here: http://www.welovemacs.com/apim242inco2.h... )
Here is the guide. Take your time and use your fingers a lot, don't be tempted to use force.
Was dit antwoord nuttig?
Rep: 11
1
Thanks, i kinda thought that was going to be the answer, not bad enough yet to need replacing. thanks for the help and the links, I will check them out
Was dit antwoord nuttig?
Afgelopen 24 uren: 0
Afgelopen 7 dagen: 0
Afgelopen 30 dagen: 4
Altijd: 544
