Repareer je spullen Gemeenschap Winkel

Uitgekomen op 4 november 2017. Model A1865, A1901. Verkrijgbaar als GSM of CDMA / 64 of 256 GB / Zilver of Space Gray. (Uitgesproken als "iPhone 10".)

1208 Vragen Bekijk alle

Opties

Two rounded and stripped pentalobes

Hi you all, I have a question. I went ahead and went to do a screen replacement for myself. The problem begun with the pentalobes, i have an ifixit p2 screwdriver, and both of the screws i rounded off and now they are stuck in there. I do have access to the insides, as I went ahead and ripped the screen threads (still somehow working and all, writing from the screen rn) and went ahead thinking I could just get these out with my tweezers and buy different pentalobes to use, but once I had the screen off, i realised the screws wouldn’t get out. Any ideas?

Block Image

Beantwoord deze vraag Dit probleem heb ik ook

Is dit een goede vraag?

Ja Nee
Score 2
1 Opmerking

I have a late 2016 (A1707) MacBook Pro that has a broken screen I bought a new screen and began disassembly. At step 23, remove antenna screws, 16 x P2, I got 9 out, then the tenth one refused and stripped my P2 bit I had a spare from experience. But it stripped as soon as I tried it now I have a rounded screw in the antenna and can’t get it out putting it back together and using an external monitor for now

door

Voeg een opmerking toe

1 Antwoord

Filteren op:
Meest nuttige Nieuwste Oudste
Het nuttigste antwoord

Opties

I think about the only thing you can do is drill them out. You might be able to superglue a pentalobe screwdriver onto the ends and see if they will turn. I might suggest getting a chap pentablobe screwdriver online if you go this route. Only other thing I can think of is using vice grips to see if you can twist them out.

Was dit antwoord nuttig?

Ja Nee
Score 1
Voeg een opmerking toe

Voeg je antwoord toe

Lochy59 zal eeuwig dankbaar zijn.
Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 0

Afgelopen 30 dagen: 6

Altijd: 177