My Kenmore dishwasher model number 665.13939K013, flashes 4 times blue and green at the same time. It won’t work. Every time I touch anything or open it, it flashes those 2 lights at the same time 4 times.
Is dit een goede vraag?
Rep: 14,6k
11
23
32
Rox - clean light blinking 4x on your model means there is an error with the wash motor circuit. Unplug or turn the breaker off for 1 minute. If it still blinks you’ll need to do some troubleshooting with a multimeter. If you are familiar with using a multimeter the tech sheet is located on the left side of to kick plate (bottom front) a screw on each side will need to be removed. Check the motor windings, all connects and any fuses.
Was dit antwoord nuttig?
Rep: 685,3k
3,4k
1,1k
2,6k
Kenmore Models without a digital display signal error codes by flashing the Clean light in a pattern unique to the error. The light first flashes the Function code, pauses for 2 seconds, and then flashes the Problem code. For example, 6 flashes followed by 1 flash (6-1) means "Inlet Water" function, "The electronic control doesn't detect water entering the dishwasher tub" problem. After a 5-second pause, the light repeats the pattern.
Can you discern what your code is?
Here’s how to do different resets on your Kenore:
Was dit antwoord nuttig?
When the dishwasher is closed. When I open it, the dishwasher beeps 15 times and in between it flashes blue and green light at the same time 4 times, then pauses for 4 seconds, then repeats. The beeps are just at at the beginning and then they go away.
Let's see if @ladytech can help on this one.
Afgelopen 24 uren: 2
Afgelopen 7 dagen: 9
Afgelopen 30 dagen: 46
Altijd: 1,277
2 opmerkingen
Hi @roxned ,
Try disconnecting (unplugging) the power to the dishwasher for about 5 minutes, then reconnect the power and check what happens.
door jayeff
Thank you so much for the help. I tried turning it off for 5 minutes. Right when I turned it back on. It started beeping and the blue and green light still is blinking 4 times.
door Rox