So the cable snapped off when I tried to disconnect the display. Does this mean this phone will never get get FaceID working again?
I obviously have the original sensors, but I guess it’s not possible to replace just the flex cable?
Is dit een goede vraag?
Rep: 133
3
It depends on if the cable is plug in type or soldered in. You can replace it if the part is available yet.
Was dit antwoord nuttig?
Rep: 526
9
3
1
Actually you can transplant these sensors onto a new flex cable. As described in the repair guide.
‘Prepare a new flex cable. Apply some Paste Flux to the bonding pad and solder the detached Flood illuminator module. ‘
Hoe repareer je de face ID-functie van je iPhone X na het repareren van je scherm?
Was dit antwoord nuttig?
Afgelopen 24 uren: 2
Afgelopen 7 dagen: 8
Afgelopen 30 dagen: 35
Altijd: 2,013
