Rep: 11
1
I bought a replacement for the front glass of my iPad mini 2, and received a plastic part. Is this normal? In other cases on this forum there are answers assuring the clients that the parts are as the originals!
Is dit een goede vraag?
Rep: 102,6k
10
56
291
That’s what I figured from your question, it “feels” like plastic, it’s lightweight and it’s flexible, thus it “must” be plastic. Of course a digitizer glass cannot be just 100% glass even if most part of it, it is indeed. Infact it’s a sandwich of different layers and materials with on top typically a protective film. For more info on various build types you could have a look here: https://www.eizoglobal.com/library/basic...
Was dit antwoord nuttig?
You were right. It was as the original, although I only figured that out after removing the old digitizer.
Afgelopen 24 uren: 0
Afgelopen 7 dagen: 0
Afgelopen 30 dagen: 2
Altijd: 132
4 opmerkingen
Never seen an iPad plastic digitizer replacement. How did you determine it's plastic ? Have you contacted seller and expressed your doubts ?
door arbaman
It feels as plastic, sounds as plastic tapping it and it is flexible, which I don't believe it would be, if it was glass.
door maurizioplll
Does it feel lighter than the original screen?
door Ben
Hard to say, since I did not remove the original yet because it is shattered.
door maurizioplll