hi, this macbook pro retina show weird things on display, if i change the cable it works for 2/3 hours than starts again. Same issue if i move it on another macbook and another display work good in this display.
Only a small bend in the display after a fall
it’s driving me crazy
Is dit een goede vraag?
Rep: 479,4k
35
329
971
You dropped a clue here which I think is telling “Only a small bend in the display after a fall”
Your display is damaged internally. You’ll need a new display assembly MacBook Pro 15" Retina (Late 2013-Mid 2014) Display Assembly and here’s the guide MacBook Pro 15" Retina Display Late 2013 Display Assembly Replacement
The damage is likely within the T-CON board logic
Was dit antwoord nuttig?
No, maybe i don’t explain well. After a display cable replacement it works perfectly for 2 hours, this is not what you expect from a broken lcd panel
A damaged display cable would react differently. iDP (also known as eDP) signaling is sorta like digital TV signal Vs analog (similar to the older video signaling system LVDS). A damaged LVDS cable would given you odd colors or distorted image. Here an iDP cable would be more like how a bad digital TV signal reacts either giving no display or a checkered board where the signal was lost. Your flashing bar is caused at the panel after the iDP conversion to the discreet column and row. The T-CON chip on the lower part of the LCD panel is failing.
When you replaced the cable you likely shifted the LCD panel just enough to get it to connect the damaged chip enough to work (see picture above)
Afgelopen 24 uren: 0
Afgelopen 7 dagen: 0
Afgelopen 30 dagen: 0
Altijd: 225
1 Opmerking
Ok changing cable don’t work anymore it will remain flickering all time. I really can’t imagine why changing it working two times for 2/3 hours and now not
door deddu1