Repareer je spullen Gemeenschap Winkel

Guides for the Wi-Fi version of the iPad Mini 2. Announced October 22nd and released November 12th, 2013. The iPad mini 2, also known as the iPad mini with Retina Display, has all the pixels of the iPad Air in a smaller 7.9" form factor.

20 Vragen Bekijk alle

Opties

Is there a trick to replacing the battery cover screws?

Everytime I attempt to put the screw back into the battery cover,the screw seems to change polarity flip upside down or jump out and stick to the side of the case..

Is there a good tip /technique to doing this I wonder?

I’ve got this far after first time battery and display renewal,so this is infuriating to say the least !!

Beantwoord deze vraag Dit probleem heb ik ook

Is dit een goede vraag?

Ja Nee
Score 0
Voeg een opmerking toe

1 Antwoord

Filteren op:
Meest nuttige Nieuwste Oudste
Het nuttigste antwoord

Opties

Magnetize a Screwdriver

the screws will then go to the screwdriver

One way and may explain the theory

https://www.wikihow.com/Magnetize-a-Scre...

Was dit antwoord nuttig?

Ja Nee
Score 2

1 Opmerking:

Thanks Bill

I was thinking that was why it was happening it seemed the screwdriver was changing the polarity hence the flipping over of the screw as soon as the magnetized driver and screw got near the hole -like it was being repelled like magnets do when you try and push them together if you known what I mean..

Never had that happen before so what was going on there I'm not sure...It shouldn't be spitting the screw out should it!

In the end I used an actual magnetic bar of the same diameter as the screw head and was able to start it off in the hole so it wouldn't be able to jump out and then screw it fully down with the driver...lucky to find that magnet , and now I'll keep it safe in my tools.

Thanks for the link I'll check that out

door

Voeg een opmerking toe

Voeg je antwoord toe

EAMONN COLLEY zal eeuwig dankbaar zijn.
Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 1

Afgelopen 30 dagen: 1

Altijd: 117