Rep: 1
1
Today I went to replace my iPhone case. I took everything loose and put it in the new housing. At the first test I realize that the cable of the speaker / charging port / microphone was not connected. So I switched the iPhone of then connected the cable. The telephone is now in a boat loop when the cable is connected. When disconnected, it starts normally. iTunes wont connect ether.
Is dit een goede vraag?
Rep: 102,6k
10
54
291
Replacing the lightning assembly seems to be your first and more reasonable step..a bad replacement may cause bootloops at times. Maybe try disconnecting Taptic engine first and see how it goes, had a few giving troubles on iPhones 7.
Was dit antwoord nuttig?
Thanks for your response at first,
The Taptic engine is not the problem for my phone do you have Some more ideas?
@sjoerd678 The lightning dock as I already suggested, the Taptic engine was worth a try to rule it out.
Its only working when the lightning dock is outside the housing otherwise it still bootloops
Mabe it shorts in the housing
@sjoerd678 Strange behavior, but yes, it seems something gets shorted. I'd try another lightning dock to be on the safe side.
Afgelopen 24 uren: 0
Afgelopen 7 dagen: 0
Afgelopen 30 dagen: 0
Altijd: 51
