Repareer je spullen Gemeenschap Winkel

Model A1200 with 2.16 or 2.33 GHz Core 2 Duo processor

113 Vragen Bekijk alle

Opties

No chime, black screen, white light steady

Hi guys,

If iMac is off, but power is plugged in, number 1 diagnostic LED is on.

If iMac is on, no chime, fans go max, black screen, white light stays steady and number 1 and 2 diagnostic LEDs are on.

If LCD unplugged and external monitor plugged in, can't turn off, it turns right back on, once external unplugged, it turns off.

Also tried with detaching everything (add on cards, hard drive, etc.), no results.

Maybe the power supply? Hope its not the logic board....

Any ideas?

Thanks!

Beantwoord! Bekijk het antwoord Dit probleem heb ik ook

Is dit een goede vraag?

Ja Nee
Score -1
Voeg een opmerking toe

3 Antwoorden

Filteren op:
Meest nuttige Nieuwste Oudste
Gekozen oplossing

Opties

LED Startup Sequence

LED #1 = Power available.

If no LED is visible:

• Verify AC source

• Verify known-good AC cable is connected

• Verify cable connection between AC inlet and power supply

• Verify cable connection between power supply and logic board

• Verify power supply

LED #1 + LED #2 = Power available, and system is powered on.

If second LED is not visible when power button is pressed:

• Verify power button connection to logic board

• Verify power button functionality

• Verify cable connection between power supply and logic board

• Verify power supply

• Verify logic board

LED #1 + LED #2 + LED #3 = Power available, system is powered on, and video card found.

If third LED is not visible after power on:

• Verify that MXM video card is seated properly

• Verify logic board

Was dit antwoord nuttig?

Ja Nee
Score 3

5 opmerkingen:

Thank you for the prompt response.

• Verify logic board

What kind of tool is required for that?

Thanks.

door

Exchanging the logic board with a known good one. Remember these instructions are for an Apple tech sitting there with all the resources in the world at his fingertips.

door

Thank you, so if third LED is not on, most likely logic board.

door

Logic board or video card. I don't remember if this video card can be changed or not. I would check with these folks on a board repair: http://www.dttservice.com/imacintel.html

door

+ Good Kung Fu

door

Voeg een opmerking toe

Opties

Hi S.M.

Have you finally fixed your iMac? What is the problem?

I have an identical iMac and the same problem as yours.

Thanks.

Was dit antwoord nuttig?

Ja Nee
Score 0
Voeg een opmerking toe

Opties

Hi,

since it turned out the motherboard went out, I decided to not change it. For a little more I could buy a new iMac...

Was dit antwoord nuttig?

Ja Nee
Score 0
Voeg een opmerking toe

Voeg je antwoord toe

s m zal eeuwig dankbaar zijn.
Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 0

Afgelopen 30 dagen: 1

Altijd: 2,686