Rep: 25
1
I did a screen replacement of my own and got kinda sloppy. Didn’t realize that there was a rubber around the home button and i accidentally ripped it off. Is there a way around this? Thanks.
Is dit een goede vraag?
Rep: 88,8k
195
260
144
It will work without it, but you break the water resistance in multiple areas. Don’t get the phone wet and it’ll be fine.
That said, I would replace the seal if at all possible or at least try and salvage the bad one. It’s still not going to seal right but 90% is still better then 0%.
Was dit antwoord nuttig?
Do you happen to know where a replacement seal can be found? Thanks.
You probably need to buy a display or an unpaired button (for the seal). I'd live with it since opening the phone compromises the water resistance anyway.
Rep: 73,8k
19
111
82
Don’t bother. You don’t know if the screen itself is waterproof because it could be assembled from parts by some other factories and did not apply glue all around the bezel.
Was dit antwoord nuttig?
Usually doing a screen replacement involves in ripping the water seal of your phone. Breaking the seal where the home button is should be no big deal. Just make sure to always keep in mind that your phone is no longer splash proof
Was dit antwoord nuttig?
Afgelopen 24 uren: 0
Afgelopen 7 dagen: 0
Afgelopen 30 dagen: 1
Altijd: 636
