Ga door naar hoofdinhoud

Released September 16, 2016. Models A1661, A1784, and A1785. Available in 32, 128, or 256 GB configurations in Rose gold, gold, silver, black, jet black, and (Product)Red.

1207 Vragen Bekijk alle

One repair lead to another issue

I just recently worked on an iPhone 7plus because the speaker was not loud enough. So I replaced and and nothing. Still had the same issue. What stroke me was the fact the after I closed it back up the home button was not working. Thing is that I didn’t even touch anything there! All I did was unscrew the top (the speaker bracket) and placed the new one in. I didn’t remove the screen or unplugged the lcd from the logic board (the phone was turned off tho) cuz I figure “why take the whole thing apart if I have acces to the speaker without having the need to do that?” Maybe that was the mistake?? Can anyone tel me why it the home button wouldn’t work if nothing was done to it period?

Beantwoord! Bekijk het antwoord Dit probleem heb ik ook

Is dit een goede vraag?

Score 0
Voeg een opmerking toe

2 Antwoorden

Gekozen oplossing

Probably due to you didn’t remove the screen. The screen flex cable is too tight and easily gets torn when you try to work on other areas. You cannot open it more than 90 degrees and you have to put it on a specialized fixture to prevent it moving about and tear the cable.

Was dit antwoord nuttig?

Score 3
Voeg een opmerking toe

You might have knocked the connection loose, bumped something on the board, or put too much stress on the flex cables while having it open and working on it. I’d inspect the board around the connections, the connections themselves, and the LCD flex cables.

Was dit antwoord nuttig?

Score 1
Voeg een opmerking toe

Voeg je antwoord toe

wm_alvarez zal eeuwig dankbaar zijn.
Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 0

Afgelopen 30 dagen: 0

Altijd: 50