Ga door naar hoofdinhoud

Replace Logic Board MacBook, early to mid 2009

Hi.

The Logic Board from my MacBook white A1181 have a problem.

The model is 820-2496-A, with processor 2.0 (early 2009 - with one temp sensor)

Can i replace this model for other (mid 2009)? I would like a faster processor, ex: 2.4

What more i have to replace to do this?

Gracias from Brazil... tks...

Beantwoord! Bekijk het antwoord Dit probleem heb ik ook

Is dit een goede vraag?

Score 0
4 opmerkingen

Please give us the last three figures of your serial number. Thanks

door

No. Serial:

(...) 4R1

door

Apple MacBook "Core 2 Duo" 2.0 13" (White-09) Specs

Identifiers: Early 2009 - MB881LL/A - MacBook5,2 - A1181 - 2300

door

Please. Someone could tell me if there is some difference between the topcase MacBook "Core 2 Duo" 2.13 13-Inch (White - Mid-2009) and MacBook "Core 2 Duo" 2.0 13-Inch (White - Early 2009)?

door

Voeg een opmerking toe

3 Antwoorden

Gekozen oplossing

Here's a comparison of the 2.0 & 2.13 GHz machines: http://www.everymac.com/systems/apple/ma...

The 661-5242 2.16 logic should drop right in without a problem. The later machines have a different logic board.

Was dit antwoord nuttig?

Score 2

3 opmerkingen:

Thanks you so much for reply...

Logic board Model 820-2496-A and 661-5242 i can change without problem

But, have i to change my RAM: 667 MHz PC2-5300 DDR2 for other 800 MHz?

Thanks again!

door

Yes, it looks like you will need to change RAM. Before doing this I would contact someone like we love macs, 1.800.588.5290 and see if they agree.

door

I found the logic board 2.13GHz.

Replace the board that had problems and tried to connect the MacBook with DDR2 667Mhz. Did not turn on, I really have to switch to DDR2 800MHz. Once i get the new RAM i post about.

Note: Battery charging started, something that had not happened.

door

Voeg een opmerking toe

After replacing my logic board some keys on the top case are not responding.

Do you think the problem may be in the top case, or just flat which can be damaged?

But now, some keyboard keys (on red) dont work.

Block Image

On red dont work

Cold be cable?

Was dit antwoord nuttig?

Score 0
Voeg een opmerking toe

Try doing an SMC + PRAM reset.

Was dit antwoord nuttig?

Score 0
Voeg een opmerking toe

Voeg je antwoord toe

Thiago Pereira Rosa zal eeuwig dankbaar zijn.
Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 0

Afgelopen 30 dagen: 0

Altijd: 4,383