Repareer je spullen Gemeenschap Winkel

Repair information and guides for the Apple iPhone 5s that was announced on September 10, 2013. Model: A1533, A1453, A1457, A1528, A1530, A1518

3530 Vragen Bekijk alle

Opties

Cant replace screen! help

I was replacing my current old lcd with my new one but when it came to putting the metal shield on i could unscrew two and the others would not unscrew how can i solve this? i tried everything i was making my self sick cause i felt like i was about to lose my phone

!! can i cut the two tabs off? please help!

Update!

i bent the tabs in just a little to fit the frame but is there anything else i can do instead of this everything worked but my screen wouldnt close all the way

Beantwoord deze vraag Dit probleem heb ik ook

Is dit een goede vraag?

Ja Nee
Score 0
Voeg een opmerking toe

3 Antwoorden

Filteren op:
Meest nuttige Nieuwste Oudste

Opties

Cutting those two tabs off is not a good idea. The screws used are PH000. If you could provide some photos of the part you are stuck on, that would be helpful for determining your issue.

Was dit antwoord nuttig?

Ja Nee
Score 0

2 opmerkingen:

what will happen if i do? any screen damage? i used a phillip screw driver and no results its like its too tight

door

Ensure you use a PH000 driver, as you can strip the screws if you are not careful. The frame will not seat properly, and you can cause damage to the display.

door

Voeg een opmerking toe

Opties

If you’re talking about the side-frame screws that hold the LCD shield in place the can be snapped off carefully. Is it ideal? No, but it can be done. Or you can purchase another backplate and be done with it.

Was dit antwoord nuttig?

Ja Nee
Score 0

1 Opmerking:

the screws on the side of the metal shield

door

Voeg een opmerking toe

Opties

Did you strip the screws that hold the shield in place? If so, I did one time, and just dremeled the heads off the screws not hurting the shield, then replacing the screws. You don’t want to cut those tabs, but only if you are going to replace the shield.

Was dit antwoord nuttig?

Ja Nee
Score 0

2 opmerkingen:

no i didnt strip them

door

make sure you have the right screw driver, and if you , try not to be afraid of giving it some more power. If it doesn't come loose, you may have to dremel the heads off the screws to remove the screws. Only issue is, you'll need replacement screws.

door

Voeg een opmerking toe

Voeg je antwoord toe

ios user zal eeuwig dankbaar zijn.
Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 8

Afgelopen 30 dagen: 10

Altijd: 92