Ga door naar hoofdinhoud

Repair and disassembly guides for the Nerf Elite Triad EX-3 released in 2013.

1 Vragen Bekijk alle

Dart not going all the way in

The darts will not sit all the way in the chamber. They will slide out about a 1/2 in, this not fire correctly

Beantwoord deze vraag Dit probleem heb ik ook

Is dit een goede vraag?

Score 0
Voeg een opmerking toe

2 Antwoorden

Het nuttigste antwoord

nerf guns are picky about their ammo sometimes, that gun in particular is really picky, darts from HB or Walmart nock-offs have slightly different inner diameter then Nerfs….. also kids chewing on them doesnt help in my experience. . my kids will eat anything..

Was dit antwoord nuttig?

Score 1

1 Opmerking:

I have the same problem. It is just one chamber, all the time. Doesn’t matter which darts (I’m only using the 3 Elite darts that came with the gun.... since it’s my child first one). The other two chambers always work and the third chamber always pops the darts out an inch. I’ll probably try to dissemble and see if I can figure out what’s going on

door

Voeg een opmerking toe

So as its not going in fully i taped some paper to the dart shown in the below picture and it worked cause it was loose

Block Image

Block Image

Block Image

Was dit antwoord nuttig?

Score 0
Voeg een opmerking toe

Voeg je antwoord toe

Raymond Hylton zal eeuwig dankbaar zijn.
Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 8

Afgelopen 30 dagen: 15

Altijd: 674