Ga door naar hoofdinhoud

Latest vacuum sealer from FoodSaver, released late 2015. Contains an accessory hose, PulseVac button, and multiple settings based on food consistency.

8 Vragen Bekijk alle

Can the accessory hose be replaced because the nipple broke

The nipple on the accessory hose valve broke off and I would like to replace it. How can I open the machine to replace this part?

Beantwoord deze vraag Dit probleem heb ik ook

Is dit een goede vraag?

Score 1
Voeg een opmerking toe

1 Antwoord

Het nuttigste antwoord

It is near impossible to replace that is why there is no replacement part. The end that attaches to inside machine goes to a enclosed reel. So you have to remove the reel and disassemble it both jobs looked very involved. The other end is very hard as well. I came up with a very easy fix you will need to order part #FA2000-000 from foodsaver. You will need to cut the hose about a inch from the canister on the new part and the old part. Now you need to splice the two parts with a small tube. I used a 1/4” delrin tube I cut the flared end off and it fits inside both hoses to join them together. Any questions ssaammss@aol.com

Block Image

Block Image

Block Image

Block Image

Block Image

Block Image

Block Image

Was dit antwoord nuttig?

Score 1

1 Opmerking:

I noticed the black hose hangs up when pulling it out you might try to bevel with a sharp knife. I used a wrap of black electric tape over the joint

door

Voeg een opmerking toe

Voeg je antwoord toe

Kim Greaves zal eeuwig dankbaar zijn.
Weergavestatistieken:

Afgelopen 24 uren: 1

Afgelopen 7 dagen: 13

Afgelopen 30 dagen: 36

Altijd: 1,564