Ga door naar hoofdinhoud

The G4 Quicksilver came in 533MHz, 667MHz, 733MHz, 800MHz, 933MHz, And 1.0GHz speeds.

49 Vragen Bekijk alle

power light goes off when released

when turning g4 on the motherboard lights up,fan comes on but light on front goes off

Beantwoord! Bekijk het antwoord Dit probleem heb ik ook

Is dit een goede vraag?

Score -1
Voeg een opmerking toe

1 Antwoord

Gekozen oplossing

Unplug the machine and all peripherals. Press and hold the start button for 10 seconds. Replace the 3.6 volt lithium 1/2 AA PRAM battery on the logic board if it's been over 3 years. Plug it back in. With the door open, press the reset button on the logic board with a pencil eraser. Let us know your results or any changes. Pray.

Was dit antwoord nuttig?

Score 3
Voeg een opmerking toe

Voeg je antwoord toe

rev frank currier zal eeuwig dankbaar zijn.
Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 2

Afgelopen 30 dagen: 2

Altijd: 1,363