iPhone is disabled, connect to itunes.

I remember my passcode, actually kid at home entered wrong passcode.

Is 3utools free source tool or chargable

It's a free tool which I use all the time for my clients / customers when we need to backup contacts, photos and messages good alternative from iTunes.

Ben,

my iphone is completly disabled, will it work i that case. I know my passcode.

If yes, will you please mention the steps that i need to perform

Thanks

What you'll need to do is open up 3Utools, plug in your iPhone to your computer. Turn it off.

Then hold power button and home button to turn it on, once you see apple logo stop holding power button but keep holding home button until you see the iTunes recovery logo.

Once it's on that screen 3uTools will tell you that the phone is in recovery mode. Click on Go Flash then select the latest firmware 12.0.1 (not beta) and check retain user data and click on flash.

It'll most likely download firmware first if yes, you will most likely need to put the phone into recovery mode again as it kicks out of it after 15 minutes.

Once that's all done it'll flash the firmware (again check retain user data to keep data). If it fails for any apparent reason try flashing it again with retain user data.

Still fails? Hit exit recovery mode for now and it should boot.

If everything goes as planned phone will be updated and will show iPhone is disabled try again in 1 hour.

Thank Ben, i will surely try these mentioned steps and will let you know if its work.

have three more question:

iphone model is iphone7 , so will combination of power and home buttom works to see itunes recovery logo?

Secondly as mentioned by you that phone will be kicked out of recovery mode after 15 mins, do i have to replug by phone again and then turn it off and thenpress combination of button to put phone on recovery mode ?

Thirdly, can i use any PC or onlythe one with which i have previously connected with?