Rep: 13
1
Hello,
I’ve replaced my WiFi antenna, WiFi works well but during the disassembly I’ve torn the flex cable which I connect to the board.
Since I can’t find iPhone 6S Plus home flex cable, do I have to buy whole LCD with the cable or is there any other model that fits iPhone 6s Plus
Is dit een goede vraag?
Rep: 26,4k
113
52
62
If you aren’t concerned about losing Touch ID functionality you are better off just getting a new home button. Much easier on your part to do this too. You might be able to loot the flex cable from a new home button assembly and attach it to your old home button which might give you Touch ID functionality.
iPhone 6s Plus Home Button Assembly
iPhone 6s Plus Vervanging van de thuisknopmodule
@merko30 You say you have torn the home button flex and “since you cannot find the home button flex”. I am just as confused. What it looks like in the picture is a display cable. If you have torn that particular cable then you will be better off just getting a new screen assembly.
Was dit antwoord nuttig?
Rep: 201
1
I actually torn the cable at the bottom of the phone. The LCD/Digitizer cable and the camera cables are fine but the third one that is closest to the right side of the phone. Can just that cable be replaced?
Was dit antwoord nuttig?
Afgelopen 24 uren: 0
Afgelopen 7 dagen: 0
Afgelopen 30 dagen: 1
Altijd: 54
1 Opmerking
I’m not sure if I understood you, the cable that is torn is one of the three from the top, here is the picture:
https://d3nevzfk7ii3be.cloudfront.net/ig...
I don’t care about Touch ID functionality, just to be able to unlock the phone without assistive touch.
door [deleted]