AK PRO 5 in1 Laminating Machine Bubble Problem

Question

iPhone 7

Rep: 243

6

22

Opties

Hi Everyone.

I bought AK PRO 5 in 1 for Laminate iPhone Broken LCD.

The problem is the Bubble.

I try it with same Parameters suggest form reseller, but the problem is same.

I change the temperature do different setting but the problem is same.

Is someone use a same machine who suggest me something…

The setting I use is :

Vaccum Time : 15 SEC

Lamination Time 15 SEC

Outgassing Time : 5 SEC

Debubbling Time : 6000, SEC

Temperature : 40 C.

The Modul who i use when i put the LCD inside the machine black (check the PIC)

Thanks

Is dit een goede vraag?

Ja Nee

Score 0

4 opmerkingen:

I

have same problem but i use 4in1 glasses and i always get pressure bubbles. Any ideas why ? I use same akpro.

I have the same problem with Ak pro. Always I have bubbles, with frame, without frame, 3 in 1, 4 in 1. I don’t know why. Thanks to any recommemdation

I am having problems with my AK pro machine, it no longer lock and there is no pressure in the machine

perhaps you have problem whith inside pump

I

have same problem but i use 4in1 glasses and i always get pressure bubbles. Any ideas why ? I use same akpro. — arnasseip
I have the same problem with Ak pro. Always I have bubbles, with frame, without frame, 3 in 1, 4 in 1. I don’t know why. Thanks to any recommemdation — David Alonso
I am having problems with my AK pro machine, it no longer lock and there is no pressure in the machine — Collins Ilondu