Ga door naar hoofdinhoud

Guides and support for devices that play video from Blu-Ray Discs.

111 Vragen Bekijk alle

Why does blu-ray player show title screen but then won't advance

Panasonic DMP-BD10A blu-ray player displays on tv screen, shows it’s reading disk and even shows MARVEL title on TV but then doesn’t read disk further. Tried other disk, it also reads it and played several of the “previews” but when selected play for movie tv just shows reading and player still shows PLAY status.

Beantwoord deze vraag Dit probleem heb ik ook

Is dit een goede vraag?

Score 0
Voeg een opmerking toe

1 Antwoord

Het nuttigste antwoord

There are a number of parts involved in proper reading of the disk. If the laser is starting to fail, this can happen. If the spindle motor is not keeping constant speed or the sled rails are dirty, the optics won’t move properly preventing reading. Make sure that the disks are clean. If cleaning is necessary do NOT clean in a circular motion. Only move a cloth from the center outward.

Try cleaning the lens of the optics using a cotton swab and alcohol. While inside, there should be a silver “rail” that the optics move on, make sure that this is free from dust.

Update this with your results.

Dan

Was dit antwoord nuttig?

Score 1
Voeg een opmerking toe

Voeg je antwoord toe

nwoods1953 zal eeuwig dankbaar zijn.
Weergavestatistieken:

Afgelopen 24 uren: 1

Afgelopen 7 dagen: 3

Afgelopen 30 dagen: 5

Altijd: 534