Repareer je spullen Gemeenschap Winkel

2.2, 2.4, 2.5, or 2.6 GHz Core 2 Duo processor

759 Vragen Bekijk alle

Opties

MBPro starts but screen dead

Hi!

When I press the start button on my MBPro I hear fans, DVD, HDD rev up and power led behaves as it should, but that's it. I hear no startup chime and the screen doesn't activate at all. I have tried SMC reset, I have tried to start it with power adapter only (adapter is working, I use it on my other MB) and I have checked that the RAM is mounted correctly. I removed the hard drive and connected it to my other MB and it works correctly, so luckily I can do a back up of it. Do any of you have any suggestions what I could try next?

Sincerely

/Fredrik

Beantwoord deze vraag Dit probleem heb ik ook

Is dit een goede vraag?

Ja Nee
Score -1
Voeg een opmerking toe

1 Antwoord

Filteren op:
Meest nuttige Nieuwste Oudste

Opties

Try Hooking it up to an external display. See if you get anything. If not then reset the Pram, when its starting up press ( option-command-p-r) Until you hear two beeps. If that still doesn't work try removing one stick of ram it could be corrupt (but highly unlikely).

Was dit antwoord nuttig?

Ja Nee
Score 0

2 opmerkingen:

I'll give it a try. Thanks!

door

No luck :-( External display doesn't react at all, PRAM reset did nothing and I tried with a couple of other RAM sticks that I know are working.

door

Voeg een opmerking toe

Voeg je antwoord toe

Fredrik Lundin zal eeuwig dankbaar zijn.
Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 5

Afgelopen 30 dagen: 7

Altijd: 756