Ga door naar hoofdinhoud

Model A1059 or A1099 / 20, 40, or 60 GB hard drive / touch sensitive click wheel

227 Vragen Bekijk alle

how do you reconnect headphone cable

I was able to take apart my old ipod iphoto and replace the battery in it. However, I can't seem to get the heapdphone cable to reconnect on the reassembly end. Did I bend something? Can I fit it? Help!

Beantwoord deze vraag Dit probleem heb ik ook

Is dit een goede vraag?

Score 1
Voeg een opmerking toe

2 Antwoorden

I suggest you check iFixit's Guide for that repair

Also you could look at this one

Was dit antwoord nuttig?

Score 1
Voeg een opmerking toe
Het nuttigste antwoord

compare the orange cable end to the photo on step 9 here:

iPod 4th Generation or Photo Headphone Jack Replacement

Is the square black connector still on the end of the orange cable? If not, then you accidentally peeled the orange cable off of the connector, which is still in its socket on the logic board. You will need to order a replacement headphone jack board, and use tweezers or needle nose pliers to GENTLY remove the damaged black connector square from the socket on the logic board.

If the cable and connector are intact, it should be a simple matter to snap it back into the socket on the logic board - the cable routing will guide the connector to the socket with the correct orientation.

Was dit antwoord nuttig?

Score 1
Voeg een opmerking toe

Voeg je antwoord toe

rchinatti zal eeuwig dankbaar zijn.
Weergavestatistieken:

Afgelopen 24 uren: 1

Afgelopen 7 dagen: 4

Afgelopen 30 dagen: 10

Altijd: 1,429