Repareer je spullen Gemeenschap Winkel

The Dyson Ball Multi Floor Upright Vacuum was released in 2012 and can be identified by the Dyson tag DC40. It is very similar in design and mechanical operation to its earlier counterpart, the DC41 Animal.

20 Vragen Bekijk alle

Opties

Why is my Dyson multi floor ball not sucking when I cleaned it out

My Dyson Ball multi floor is not sucking I went through the entire thing did not find any clogs that I pull off the the catcher the round tube and clean the filters out of that clean the HEPA filter pulled the side of the ball often see anything cotton that filter went through all the tubing and didn’t find anything in there it turns on and the brushes flick but it’s not sucking from the front side sucking from the top side so it’s sucking out we’re supposed be blowing in

Beantwoord deze vraag Dit probleem heb ik ook

Is dit een goede vraag?

Ja Nee
Score 1
Voeg een opmerking toe

1 Antwoord

Filteren op:
Meest nuttige Nieuwste Oudste

Opties

there is a hose in the ball that moves from wand to floor attachment when the handle is moved from parked to push position.

the hose sometimes hangs, or fails to complete its motion from one vacuum seal to the other.

i am here trying to find out why that is happening, before i have to go behind the filter in the ball

Was dit antwoord nuttig?

Ja Nee
Score 0

1 Opmerking:

I am also having this issue, except there is a visible hole in the small flip flop hose on my vaccuum. I can repair the hose but how do I get to it?

door

Voeg een opmerking toe

Voeg je antwoord toe

luker6878 zal eeuwig dankbaar zijn.
Weergavestatistieken:

Afgelopen 24 uren: 1

Afgelopen 7 dagen: 19

Afgelopen 30 dagen: 64

Altijd: 4,028