Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Onderdelen & Gereedschap

The third-generation Golf (Mk3) made its home-market début in August 1991 and again grew slightly in comparison with its immediate predecessor, while its wheelbase remained unchanged.

5 Vragen Bekijk alle

My right brakelight is not working even after a bulb change

I bought this car a month ago and the guy I bought off said the right break light doesn't work and he also tried to change the bulb but no luck all other lights work. I have checked wires and they all seem normal

Beantwoord deze vraag Dit probleem heb ik ook

Is dit een goede vraag?

Score 0

Commentaar:

Is only one of the bulbs not working or do none of them work?

door

Just one I've switched the one bulb to the other to test it.....now there seems to be one less connector for the right side there's 3 to plug in on the left and only 2 on the right

door

Voeg een opmerking toe

Nintendo Switch-kits

Een snelle oplossing die je weer mee laat doen

Koop Switchkits

Nintendo Switch-kits

Een snelle oplossing die je weer mee laat doen

Koop Switchkits

3 Antwoorden

Check and replace the fuses. There is often more than one fuse box, check your manual. On some cars there is a set of fuses under the hood and another inside the dashboard or under it somewhere.

Was dit antwoord nuttig?

Score 0

Commentaar:

Yes but wouldn't that mean all the lights on the taillight would be out not just the left brake light

door

Voeg een opmerking toe

Check the most obvious things first…

Bulb, guarantee that its a known good one..

Corrosion on the bulb socket

Corrosion on the light bulb support wire connector

Fuses

Check the ground connection

if all fails, you are looking at wiring problem…

Was dit antwoord nuttig?

Score 0
Voeg een opmerking toe

One of the things that could cause this is using single filament bulbs were 2 filament bulbs are meant to be installed. to check this, remove the bulb and check the back of the bulb, count the connector pins. now check the socket and count the connector pins. these should be the same, if not you have the wrong bulb.

Might be worth checking this.

Installing wrong number of filament bulbs can cause al sort of strange behaviour, like when indicating the brake light starts flashing for example.

Was dit antwoord nuttig?

Score 0
Voeg een opmerking toe

Voeg je antwoord toe

chris cantin zal eeuwig dankbaar zijn.
Weergavestatistieken:

Afgelopen 24 uren: 5

Afgelopen 7 dagen: 23

Afgelopen 30 dagen: 71

Altijd: 688