Repareer je spullen Gemeenschap Winkel

Repair and disassembly guides for GE Microwave ovens.

349 Vragen Bekijk alle

Opties

Replacing dead high voltage cap with similar of lower capacitance.

Hi,

The high voltage capacitor for my microwave oven has shorted. It is a 2100v, 86mfd capacitor.

I have a "spare" that is very similar: 2100v .76 mfd (so .76 instead of .86 mfd. Can I use it?

Thanks

Beantwoord deze vraag Dit probleem heb ik ook

Is dit een goede vraag?

Ja Nee
Score 0
Voeg een opmerking toe

1 Antwoord

Filteren op:
Meest nuttige Nieuwste Oudste

Opties

Without knowing more, I'd say not to use it. That particular rating may be required for the proper operation of the magnetron (the thing that generates the microwaves). GE should be able to get you the right part.

Best of luck.

Was dit antwoord nuttig?

Ja Nee
Score 0

1 Opmerking:

I had been hoping for an informed reply. It turns out, as I learned since I posted the question, that the high voltage capacitor is part o fhe voltage doubling circuit between the high voltage transformer and the magnetron. If the capacitance is a bit low, it reduces the final voltage - it does not quite "double" - to the magnetron, which results in a small reduction in the power the magnetron delivers, but with zero risk to the circuitry.

door

Voeg een opmerking toe

Voeg je antwoord toe

H Stahl zal eeuwig dankbaar zijn.
Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 0

Afgelopen 30 dagen: 2

Altijd: 137