Rep: 1
1
I've had the PSU rebuilt. Replaced the battery. Changed the hard drive. Replaced the optical drives. Changed the video card. replaced the memory. Tried holding down the PMU and the on button for 15 seconds, no good. Pulled all the cables and held the on button for at least 15 or more seconds, still no good. What's left besides R&Ring the motherboard and or the daughter board?
Is dit een goede vraag?
Rep: 685,3k
3,4k
1,1k
2,6k
Have you pressed the CUDA button on the logic board?
Was dit antwoord nuttig?
Where’s the CUDA? There only one button that I can see.
Rep: 26,4k
113
52
62
@alm1ghty55 The CUDA button is labeled S4 in the image I provided below. Look near the bottom left corner of the image. Hopefully this helps.
Was dit antwoord nuttig?
Your motherboard graphic is not my board 4X AGP Video slot is my board not PCI Video Slot.
Your motherboard graphic is not my board 4X AGP Video slot is my board not PCI Video Slot.
Also when I boot the keyboard caps lock doesn't light.
Afgelopen 24 uren: 0
Afgelopen 7 dagen: 0
Afgelopen 30 dagen: 2
Altijd: 148
3 opmerkingen
The button your refering to is called PMU and yes I've pressed it many times. I've learned from past experience with other Mac's by holding the PMU button and the start button for fithteen seconds or more would solve the problem. Not in this case.
door David Kievman
The board your refering to is not my board. I have a G4 MDD 1.25 GHZ Single CPU.
door David Kievman
Just replaced the motherboard. The original had a broken capacitor. Also The PSU was dead so I R&R'd it. boots but has the original problem. How do I know if the CPU is bad?
door David Kievman