Ga door naar hoofdinhoud

Repair information and guides for the iPhone 6S Plus that was released on September 25, 2015. Model A1687, A1634

1041 Vragen Bekijk alle

NFC reader not working after replacing battery.

Just noticed that my nfc isnt working when trying to use apple pay. I replaced the battery myself last week so Im assuming I damaged something during the process. What should I start with checking or replacing? Thanks

Beantwoord! Bekijk het antwoord Dit probleem heb ik ook

Is dit een goede vraag?

Score 1
Voeg een opmerking toe

2 Antwoorden

Gekozen oplossing

You may have inadvertently damaged or not re-assembled the NFC bracket next to the Screen Bracket. Check out this guide, specifically steps 30-31.

Was dit antwoord nuttig?

Score 1

1 Opmerking:

Just opened phone back up and inspected that area, I didnt see any issue with it I definitely hadn't messed with it when I changed the battery. Have you heard of people needing to replace the nfc bracket after a battery change?

door

Voeg een opmerking toe

I had replaced my iPhone 6S Plus battery (2750 mAH) with that of 6 Plus (2915 mAH) since both have the same connectors. Battery life did slightly increase but at the expense of the non-functioning NFC/Apple Pay. I think it might have to do with the overclocking of the NFC frequencies out of the acceptable spectrum .

I thought the slightly longer battery life wasn’t worth the lack of NFC so I installed the correct one for iPhone 6S Plus battery (2750 mAH) and NFC/Apple Pay is working well afterwards.

Was dit antwoord nuttig?

Score 1

1 Opmerking:

I had the same issue on my iPhone 7. After replacing the old battery for a new one with much more capacity (1800 vs 2100 mAH), the NFC stopped working.

I will try to replace back a 1800 mAH battery again in the future, and let's see if the NFC works well again.

door

Voeg een opmerking toe

Voeg je antwoord toe

Chad zal eeuwig dankbaar zijn.
Weergavestatistieken:

Afgelopen 24 uren: 2

Afgelopen 7 dagen: 8

Afgelopen 30 dagen: 24

Altijd: 3,581