Rep: 23
1
iBook G3 800Mhz 640ram
Using the instructions on website and the suggested 120gb WD hard drive from ifixit, I can not get the hard drive to be shown on the install OSX 10.3 software. The old hard drive works fine just a little small to really do anything with. This is my first apple computer. Is there some sort of bios setting or setup for an apple to recognize a new hard drive?
Is dit een goede vraag?
Rep: 685,3k
3,4k
1,1k
2,6k
It needs to be formatted before you can install a system. Start up from your system installation disk. Hold down "C" key. Go to the second screen pull down menu to Utilities -> Disk Utility and select the drive on the left and format it OSX Extended, give it one or more partition. Now you can install a system.
Was dit antwoord nuttig?
Afgelopen 24 uren: 0
Afgelopen 7 dagen: 5
Afgelopen 30 dagen: 6
Altijd: 1,547
2 opmerkingen
Thanks Mayer,
Your the best.
door nwasness
Glad to be of service. Thanks for a well stated question.
door mayer