Ga door naar hoofdinhoud

Released September 16, 2016. Models A1661, A1784, and A1785. Available in 32, 128, or 256 GB configurations in Rose gold, gold, silver, black, jet black, and (Product)Red.

1366 Vragen Bekijk alle

3d touch and touch id not working..

The touchscreen i.e. 2d touch of my phone works fine but the 3d touch isn’t responding...?

I tried reseting the phone but it just avoids to work..

Even the Touch ID is not working even though the home button works just fine but the finger print isn’t sensed......

I had a screen replacement once.

I would be nice if you help me in finding the problem with it...

Beantwoord! Bekijk het antwoord Dit probleem heb ik ook

Is dit een goede vraag?

Score 1
Voeg een opmerking toe

4 Antwoorden

Gekozen oplossing

Hi,

Both the 3D Touch and home button run through the same cable, I would highly suggest trying another screen, as there may be damage in the cable. :-)

Was dit antwoord nuttig?

Score 3

3 opmerkingen:

Are you sure as I have problem only with my Touch ID but the home button still works.

door

Yes, I am quite positive, try another screen and let me know, also make sure it’s not a poor copy screen

door

Sure will do that..!

door

Voeg een opmerking toe

I had the same problem, and after i replaced it with the old screen it all worked and I found out that some how the little cable was broken:(

Was dit antwoord nuttig?

Score 1

1 Opmerking:

I e replaced 2 screens and still can’t get working properly

door

Voeg een opmerking toe

I have 3Dtouch, touchID and force touch not working after I opened My iphone7plus, maybe changing screen I can solve the problem ?

Was dit antwoord nuttig?

Score 0

1 Opmerking:

I’m pretty sure you have damage one of the flex cable ( the lower one) it’s very easy to . i have done it a few times:( So you you have to be very very very carefull when you open up your phone.

door

Voeg een opmerking toe

I have this problem too with my iPhone 8 Plus, the flex cable doesn’t even seem damaged at all.

Was dit antwoord nuttig?

Score 0

3 opmerkingen:

It is for sure damaged, change backlight and all will be right

door

When I opened my 7 plus I couldn’t see broken flex till I put away backlight screen protection. If you opened your iPhone and from that moment Touch ID and home button doesn’t worked anymore, is for sure the damaged flex. Don’t change any other things, don’t’ change home button, just be very very very careful and change back light. By change only back light your screen will be good as usual. if you change all the screen with a preassebled as GIGA FIXXO ON AMAZON, it will be very easy and secure, but you will not have the original qualiti of apple screen

door

Attention, flex Brocken is not the one you see near the home button!! The flex Brocken is under the protection of the screen. Don’t do it by yourself become is too risky, go to a Chinese or to a Irepair, and say that you want change backlight (15€ Part cost)

door

Voeg een opmerking toe

Voeg je antwoord toe

Shivam Patil zal eeuwig dankbaar zijn.
Weergavestatistieken:

Afgelopen 24 uren: 1

Afgelopen 7 dagen: 1

Afgelopen 30 dagen: 2

Altijd: 3,270