Rep: 1
2
2
I replaced a screen for iphone 5s. Screen worked fine before I put screws in. After tightening in the screws its in a boot loop. The screen stays black with white apple logo, then restarts. Tried DFU restore and it gives me error code 9. Any ideas?
Is dit een goede vraag?
Rep: 221,4k
15
289
807
Hmmm...
The fact that it worked just before you put in the screws makes me wonder if you didn't accidentally put in the screws in the wrong place. I would take the screws out (for the screen bracket) and check them with a digital caliper to be certain they were not screwed in the wrong holes. You could have Long-Screw Damage
Austin's suggestions are good too so I would definitely try them.
Was dit antwoord nuttig?
Rep: 2,4k
12
40
2
try a different battery. if that doesnt help, try connecting the screen without the prox flex. a damaged prox flex can cause all sorts of weird boot issues.
Was dit antwoord nuttig?
Afgelopen 24 uren: 1
Afgelopen 7 dagen: 6
Afgelopen 30 dagen: 6
Altijd: 480
