Ga door naar hoofdinhoud

Model A1013, A1052, A1085, or A1107 / 1440x900 screen resolution

121 Vragen Bekijk alle

My screen goes black after a few minutes.

My machine boots successfully but it makes a strange noise near the power button. After a few minutes and screen goes black, as if asleep, but will not restore - no matter what buttons or strokes are done. If restarted the screen returns/restarts as normal, until the few minutes pass. Any help troubleshooting will be wonderful.

Daniel

Beantwoord! Bekijk het antwoord Dit probleem heb ik ook

Is dit een goede vraag?

Score -1
Voeg een opmerking toe

1 Antwoord

Gekozen oplossing

Startup from your system installation disk, "C" key and go to the second screen pull down menu to Utilities, Disk Utility and repair your hard drive.

Was dit antwoord nuttig?

Score 2

1 Opmerking:

A good start--run until it reports no trouble found +

door

Voeg een opmerking toe

Voeg je antwoord toe

kinghovey zal eeuwig dankbaar zijn.
Weergavestatistieken:

Afgelopen 24 uren: 1

Afgelopen 7 dagen: 2

Afgelopen 30 dagen: 3

Altijd: 1,001