Apple released the slimmed-down, buffed up iPad Air on November 1, 2013 in a choice of Space Gray or Silver. It packs the custom A7 processor and ships in 16, 32, 64, and 128 GB configurations.

461 Vragen Bekijk alle

Ipad Air wont charging and turn on

Charger connected when not show any screen, not reponse

I checked rails

PP3V0_S2R_TRISTAR : 0v

PP1V8_S2R_TRISTAR : 0v

PPVBUS_PROT : 4.4v

Ppvbus e75 usb conn : 4.4v

Help me please

Sorry I cannot speak english well

Update (03/07/2017)

Block Image

Block Image

Block Image

Block Image

Block Image

Block Image

Block Image

I checked VCC MAIN

VCC MAIN : ALL 5.2V, NOT SHORT

and PP3V0_S2R_TRISTAR , PP1V8_S2R_TRISTAR line

Block Image

checked

but all capacitor not short, volatage is 0

upload several pictures,

check please

Beantwoord! View the answer Dit probleem heb ik ook

Is dit een goede vraag?

Score 1

Commentaar:

Add

WLED LX A,B : 5.2V (datasheet :20v)

PPLED OUT A,B : 5.2V (datasheet :20v)

PPLED OUT BACK REG : 5.2V(datasheet :20v)

Measured value is lower than the value of the Regulation

U8100 problem?

door

Replace the tristar. It is very chipped and probable damaged.

door

Check if the WLED and PPLED lines are shorted to vcc_main.

door

Een opmerking toevoegen
Verspreid de kerstsfeer
Krijg 12€ korting op je aankoop van 50€ of meer met de code FIXMAS12
Verspreid de kerstsfeer
Krijg 12€ korting op je aankoop van 50€ of meer met de code FIXMAS12

3 Antwoorden

Gekozen oplossing

The TRISTAR voltages should not read 0V.

Those voltages are being driven by the PMIC (U8100). You will need to determine if the 0V, probably caused by a short somewhere along the line, is due to a faulty PMIC, faulty Tristar (U6000) or a bad capacitor along the line.

UPDATE (2017-03-07)

I saw your update on the measured voltages. It would appear that the LED Buck Converter is not doing its job. This is caused by either defective passive components, such as the coil and diode (these are easy to check), or it is a defective PMIC. Considering you have other voltage issues (i.e. Tristar), I would lean more towards the PMIC. However, given that the PMIC is much harder to replace, you could try changing Tristar first to see if that solves the problem.

I would also probe all of the output voltages on the PMIC to see if there are more problems.

Was dit antwoord nuttig?

Score 4

Commentaar:

Thank you for your kind reply. "What is mean I,E? I'll check it.

door

Een opmerking toevoegen

Are those going into or coming out of the tristar? Test for vccmain, and short to ground on those pins. Also will it power up with a known good battery?

Was dit antwoord nuttig?

Score 1

Commentaar:

Thank you for your kind reply.

I'll check it.

door

Een opmerking toevoegen

solved ? this problem ipad air ?

Was dit antwoord nuttig?

Score 0
Een opmerking toevoegen

Voeg je antwoord toe

Chulsunpark zal eeuwig dankbaar zijn.
Weergavestatistieken:

Afgelopen 24 Uren: 2

Afgelopen 7 Dagen: 10

Afgelopen 30 Dagen: 90

Altijd: 1,220