Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Onderdelen & Gereedschap

Has anyone ever used conductive glue

Im trying to repair a remote keypad for a robotic arm Im working on and it has a flex trace cable that has clips on the end that require soldering but as the cable is plastic it will melt long before the solder. Ive been looking online and checking out conductive glue and wondering if any of you have used it and how well does it work

Beantwoord! View the answer Dit probleem heb ik ook

Is dit een goede vraag?

Score 0
Voeg een opmerking toe

Nintendo Switch-kits

A quick fix to get back in the game

Shop Switch Kits

Nintendo Switch-kits

A quick fix to get back in the game

Shop Switch Kits

1 Antwoord

Gekozen oplossing

@jimfixer - I've mostly used it for EMI shielding when I've damaged a shield.

The problem you'll face is the movement of the part will cause it to breakdown. It also won't carry a high current load.

Was dit antwoord nuttig?

Score 3

Commentaar:

@danj thanks for your response, does it dry brittle, if so what if I were to coat it with other glue or epoxy will it hold its current load or will other glue cause a problem?

door

Hi @jimfixer

I've used it with varying results to coat the contact surface of TV (as well as pvr and A/C unit) remote control unit's push buttons. (just a smear of glue to provide the conductivity required to s/c the board contact strips when the button is pressed)

On some it has lasted the distance and is still working whilst on others it has peeled off. So like @danj stated movement seems to be the major problem when trying to use it.

door

I won't call it brittle, just not strong. I wouldn't overcoat it just make sure the part does not shift or flex at the break.

door

Voeg een opmerking toe

Voeg je antwoord toe

Jimfixer zal eeuwig dankbaar zijn.
Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 0

Afgelopen 30 dagen: 1

Altijd: 55