Model A1311 / Mid 2011 / 2.5 & 2.7 GHz Core i5 or 2.8 GHz Core i7 Processor

359 Vragen Bekijk alle

Mid 2011 iMac display not working

I have a mid 2011 imac. The display stopped working. The first diagnosis light is off whereas the other lights are on. Could you please tell me what the problem is?

I tried connecting secondary monitor but it did not work.

Beantwoord! View the answer Dit probleem heb ik ook

Is dit een goede vraag?

Score 0
Een opmerking toevoegen

Gratis verzending van alle bestellingen van meer dan US$ 100 of met een Pro Tech Toolkit!

Doorblader onze winkel

1 Antwoord

Gekozen oplossing

From the sounds of it I suspect your real issue is the displays backlight.

What I think is confusing you is the external display is not working. Are you sure you have it setup correctly and using the good cable?

Instead of worrying about the external display take a flashlight and holding it on the display at a sharp angle are you able to see the faint image of your desktop icons? If you are they the display is working correctly (which the diagnostic LED's are also telling me as well).

Here is the IFIXIT guide to replace the backlight driver board: iMac Intel 21.5" EMC 2428 LED Driver Board Replacement. Before you go down this path make sure the cable connections are correct (if you opened the system).

Was dit antwoord nuttig?

Score 1
Een opmerking toevoegen

Voeg je antwoord toe

Prakash zal eeuwig dankbaar zijn.

Afgelopen 24 Uren: 1

Afgelopen 7 Dagen: 4

Afgelopen 30 Dagen: 25

Altijd: 544