Ga door naar hoofdinhoud
Sluit je aan bij de reparatiegemeenschap! Maak een account aan

Reparatiehandleidingen en ondersteuning voor Dell Netbooks, een klasse kleine, lichtgewicht laptops uit het einde van de jaren 2000.

A cabinet file necessary for installation cannot be trusted

A cabinet file necessary for installation cannot be trusted. Please verify the Cryptographic Services are enabled. When i tried to install directx i got this message " A cabinet file necessary for installation cannot be trusted.

How to solve this..

Beantwoord! Bekijk het antwoord Dit probleem heb ik ook

Is dit een goede vraag?

Score 12
5 opmerkingen

how to verify cryptographic services are enabled

please replay to hurryup

door Deel

please help me

door Deel

i have fixed on https://www.ahmedhub.us

door Deel

@shahzaib khalil

Try this!

Set Cryptographic Services to automatic Set the Cryptographic Services to Automatic, and then try to install the program again. To set the Cryptographic Services to Automatic, follow these steps:

Start the Administrative Tools utility in Control Panel.

Double-click Services.

Right-click Cryptographic Services, and then click Properties.

Click Automatic for Startup type, and then click Start.

Refer: http://support.microsoft.com/kb/822798/ and follow all the methods listed in the KB article.

Man is the only animal that laughs and weeps; for he is the only animal that is struck with the difference between what things are and what they might of been.

door Deel

mercy.the best wishes for you

door Deel

Voeg een opmerking toe

3 Antwoorden

Filteren op:
Gekozen oplossing

Hey Bro, I don't know if you still have issues with this but this is for anyone how is still experiencing this issue when trying to install DirectX.

I searched for hours and struggled to get this fixed, long story short I finally got it fixed!

Please try using the following link. Note: this is not a scam nor virus , it's from the official website (Microsoft)

https://www.microsoft.com/en-us/download...

Installing that fixed my issue.

1.Create an empty folder (The folder's name isn't important, just leave it blank for all I care)

2.Put the directx_Jun2010_redist.exe (That you just downloaded) into that empty folder.

3.Install/open the "directx_Jun2010_redist.exe"

4.Scroll through all the contents that were extracted, look for "DXSETUP.exe" and Install that.

5.Click through the on screen instructions and allow it to complete.

6.What are you still doing here you're DONE!! :)

Was dit antwoord nuttig?

Score 68

38 opmerkingen:

thanks, its work

door Deel

I just registered to thank you. Your solution solved my problem after hours of struggling. Thank you very much!

door Deel

I just registered to thank you. Your solution solved my problem after hours of struggling. Thank you very much!

door Deel

Thanks alot bro..

It worked....

Legendary

door Deel

Thank you very much. I had to register to thank you

door Deel

33 commentaren meer tonen

Voeg een opmerking toe

This is what I did and it worked!!!

1. navigate to \Windows\System32\directx\ or \Windows\SysWow64\directx

if you have Windows 7 x64.

2. Click on "organise" file menu, then "folder and search options" then

in the "View" tab check "show hidden files and folders" and then "ok"

3. websetup folder will be visible now. go in there and delete all

contents.

4. run "dxwebsetup" again.

Works for me under Windows 10 64bit.

Was dit antwoord nuttig?

Score 2

3 opmerkingen:

Thanks man!!!! i was going gray over here that really helped

door Deel

Most welcome

door Deel

When I try to run dxwebsetup I get some error about a cabinet file and cryptographic services

door Deel

Voeg een opmerking toe

ممنون در رفع مشکل من خیلی موثر شد.همیشه پر توان باشید.

Was dit antwoord nuttig?

Score 0
Voeg een opmerking toe

Voeg je antwoord toe

Winkigreen zal eeuwig dankbaar zijn.
Weergavestatistieken:

Afgelopen 24 uren: 2

Afgelopen 7 dagen: 15

Afgelopen 30 dagen: 61

Altijd: 46,526